Australian construction service rates (2026)
How much should you be paying for construction services? Compare 2026 rates for earthworks, demolition, concreting, welding, drilling and 20+ other services across Australia.
By Drew McPherson · Last updated 8 October 2026 · Rates reviewed every 6 months
Download the 2026 construction services rates matrix
Need a clearer picture of what different construction services can cost? Download the 2026 rates matrix to compare common pricing units, indicative rates, minimum charges and other costs that may affect your project budget.
Get real quotes for your job
Tell us the service you need and where. Local contractors send you prices, free.
- Trades and specialist contractors
- Contractors servicing your area
- No obligation
Construction service pricing can vary widely depending on the trade, project scope, location and how the work is charged. Some contractors work on hourly rates, while others price by the metre, square metre, tonne, load or complete project. Rates are indicative and shown ex GST unless otherwise stated.
Construction service rates across Australia
| Service | Typical rate |
|---|---|
| Diesel mechanics | $80–$120/hr for basic servicing |
| Asphalt contractors | $30–$45/m² for residential asphalting |
| Vacuum and hydro excavation | $170–$350/hr wet hire depending on truck size and crew |
| Tree services | $60–$120/hr for tree pruning |
| Demolition | $80–$300/hr depending on structure size |
| Service locating / GPR | $140–$300/hr with a locator |
| Water bore drilling | $50–$160/metre depending on bore type |
| Piling and screw piles | $350–$550/pile for standard screw pile installation |
| Mobile welders | $70–$160/hr for basic welding |
| Mobile truck mechanics | $140–$220/hr |
| Land clearing | $40–$150/m³ for residential clearing |
| Concreting | $75–$150/m² for a concrete slab |
| Hydraulic hose repairs | $110–$140/hr |
| Excavation and earthworks | $70–$300/hr for professional excavation |
| Surveying and engineering consultants | $110–$300/hr depending on discipline |
| Drilling contractors | $50–$150/hole for small concrete cores |
| Kerb and channel | $50–$200/metre depending on project type |
| Hydroseeding | $400–$600 for up to 100 m² |
| Septic and liquid waste | $150–$200/hr for septic tank pumping |
| Bulk and heavy haulage | $120–$240/hr wet hire |
| Boilermakers | $50–$150/hr depending on work type |
| Concrete recycling | $100–$140/tonne for collection, crushing and delivery |
| Line marking | $6–$30/metre for standard to thermoplastic marking |
| Traffic control | $50–$70/hr per traffic controller |
| Retaining walls and rock pitching | $150–$500/m² depending on wall type |
Source: Indicative rates based on current Australian contractor pricing, supplier information and services available through the iseekplant marketplace. Actual pricing varies by location, scope and site requirements.
Need a contractor?
Find experienced contractors for your next project and compare quotes from suppliers servicing your area.
Get free quotesProvide construction services?
Connect with customers actively searching for contractors, trades and specialist construction services.
List your businessHow are construction services priced?
There is no single pricing model for construction services. The way a job is charged usually depends on the type of work, the resources required and how easily the project can be measured.
Hourly rates
Many mobile trades and specialist contractors charge by the hour. This is common for diesel mechanics, welders, boilermakers and some excavation services. Minimum hours, call-out fees and travel costs may also apply.
Per metre or square metre
Services that can be measured consistently are often priced by length or area. This may include drilling, kerbing, line marking, concreting and certain demolition works.
Per tonne or load
Haulage, waste removal and recycling services may be priced according to weight, truck load, distance travelled or a combination of these factors.
Fixed project pricing
Some jobs are better suited to a complete project quote. Contractors may assess labour, equipment, materials, access and site conditions before providing a final price.
What affects construction service costs?
The advertised rate is only part of the overall project cost. A range of practical factors can influence the final quote.
Minimum charges and call-outs
Short jobs may still attract a minimum booking period or call-out fee, particularly for mobile trades and specialist services.
Labour requirements
Jobs that require larger crews, specialist trades, supervisors or additional site personnel will generally cost more than work completed by a single operator.
Plant and equipment
Some service rates include machinery, while others charge plant separately. Check what is included before comparing contractor quotes.
Materials
Concrete, asphalt, steel, replacement parts, aggregates and other materials may sit outside the labour rate and be added to the final cost.
Travel and mobilisation
Long-distance travel, remote sites and specialist equipment can add mobilisation and demobilisation costs to the project.
Site access and conditions
Restricted access, difficult terrain, underground services, traffic management and additional safety requirements can all increase the time and resources needed.
After-hours work
Night work, weekends, public holidays and urgent call-outs may attract higher rates or additional labour charges.
GST
Rates in this guide are presented ex GST unless otherwise stated, making it easier to compare pricing across different suppliers.
Explore construction service rates
Browse indicative pricing for some of the most commonly requested construction and trade services across Australia. Each service follows the same pattern: a quick rate summary, the rate table, price factors, common questions and two next steps: get quotes if you’re hiring, or list your business if you provide the service.
Hiring a machine rather than a contractor? Compare machine hire rates for excavators, dozers, cranes and 30+ other machines.
Diesel mechanic rates
$80–$120/hr for basic servicing
Diesel mechanic rates
$80–$120/hr for basic servicing
Diesel mechanic rates vary by service type, job complexity, location, travel requirements and whether the work is completed in a workshop or on site.
All rates ex GST and indicative only.
What are typical diesel mechanic rates?
| Service type | Indicative hourly rate |
|---|---|
| Basic diesel engine service | $80–$120/hr |
| Preventive maintenance | $70–$130/hr |
| Advanced diagnostics and repairs | $100–$200/hr |
| Emergency repairs | $120–$250/hr |
| Mobile diesel mechanic | $130–$210/hr |
Source: Indicative rates based on current Australian diesel mechanic pricing and service information published through the iseekplant platform. Actual rates vary by location, equipment type, travel and job requirements.
What can affect the price
- Type of repair: Routine servicing and maintenance generally cost less than advanced diagnostics, major component repairs or engine overhauls.
- Mobile call-out: On-site diesel mechanic services may attract a call-out charge or a higher hourly rate to cover travel and mobile servicing costs.
- Emergency repairs: Urgent breakdowns can attract higher labour rates, particularly for after-hours, weekend or public holiday work.
- Travel: Travel charges may apply for regional, remote or difficult-to-access sites and can increase the final service cost.
- Parts and materials: Replacement parts, fluids, filters and other consumables are generally additional to the mechanic’s labour rate.
- Equipment type: Heavy construction, mining and transport equipment may require specialist diagnostics, tooling and experience, which can affect the final rate.
Related guides
Diesel mechanic cost guide · Mobile truck mechanic rates · Mobile diesel mechanics · Diesel fitters
Common questions
How much does a diesel mechanic cost per hour?
Diesel mechanic rates vary by the type of work. Basic engine servicing is typically around $80–$120 per hour, while advanced diagnostics and major repairs can range from approximately $100–$200 per hour.
How much does a mobile diesel mechanic cost?
Indicative mobile diesel mechanic rates can range from around $130–$210 per hour, depending on location, travel, equipment type and the work required.
How much does an emergency diesel repair cost?
Emergency repair rates can range from approximately $120–$250 per hour, with urgent or after-hours call-outs sometimes attracting additional charges.
Do diesel mechanics charge a call-out fee?
They can. Mobile mechanics may charge for travel, call-out time or mobilisation, particularly for regional and remote sites.
Are parts included in the hourly rate?
Usually not. Parts, filters, oils, fluids and other materials may be added separately to the labour charge.
Can diesel mechanics service heavy machinery on site?
Yes. Many mobile diesel mechanics service construction, mining and transport equipment directly on site, depending on access and the work required.
Are diesel mechanic rates ex GST?
Yes. All rates in this guide are ex GST unless otherwise stated. Confirm GST and any travel, call-out, parts or after-hours charges on the final quote.
What affects diesel mechanic pricing?
Job complexity, mechanic experience, equipment type, parts, travel distance, location, urgency and whether the work is completed on site can all affect the final cost.
Asphalt contractors, repairs and driveways rates
$30–$45/m² for residential asphalting
Asphalt contractors, repairs and driveways rates
$30–$45/m² for residential asphalting
Asphalt pricing is usually measured by area, with preparation and finish requirements having a major influence on the final quote.
All rates ex GST and indicative only.
What are typical asphalt rates?
| Service type | Indicative rate |
|---|---|
| Residential driveways | $30–$45/m² |
| Commercial parking lots | $35–$55/m² |
| Road surfacing | $40–$65/m² |
| Asphalt repair and maintenance | $25–$40/m² |
| Asphalt resurfacing | $45–$75/m² |
| Asphalt sealing | $20–$35/m² |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Project area and asphalt thickness
- Base preparation
- Material transport
- Drainage and edge finishing
- Site access
- Project management
Related guides
Asphalting cost guide · Asphalt driveways · Asphalt repairs · Bitumen sealing
Common questions
How much does asphalt work cost?
Residential driveways typically cost $30–$45/m² and commercial car parks $35–$55/m². Road surfacing ($40–$65/m²) and resurfacing ($45–$75/m²) cost more, while sealing an existing surface is cheaper at about $20–$35/m².
What affects asphalt prices?
Area and asphalt thickness set the base price, but base preparation, drainage work and edge finishing can add significantly to a quote. Small jobs often cost more per square metre because the crew, plant and materials still need to be brought to site.
Vacuum and hydro excavation (NDD) rates
$170–$350/hr wet hire depending on truck size and crew
Vacuum and hydro excavation (NDD) rates
$170–$350/hr wet hire depending on truck size and crew
Vacuum and hydro excavation rates depend on truck capacity, crew requirements, disposal cycles and the precision required around underground services.
All rates ex GST and indicative only.
What are typical vacuum and hydro excavation rates?
| Service type | Indicative rate |
|---|---|
| 1,000 L vacuum trailer | From $500/day dry |
| 3,000 L vacuum truck | From $550/day dry; from $170/hr wet |
| 6,000 L vacuum truck | From $625/day dry; from $200/hr wet |
| 9,000 L vacuum truck | From $650/day dry; from $225/hr wet |
| Hydro excavation | About $250–$500/hr |
| Hydro excavation full day | $2,000–$4,500/day |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Truck capacity
- Minimum call-out
- Spoil disposal
- Water usage
- Travel time
- Soil and site conditions
Licensing and approvals
Start every job with a free Before You Dig Australia (BYDA) enquiry. Asset owners may require services near your dig to be exposed by non-destructive digging before any mechanical excavation.
Related guides
Vacuum truck hire rates · Vacuum truck hire rates guide · Brisbane · Perth · Newcastle · Geelong · Hydro excavation
Common questions
How much does vacuum and hydro excavation cost?
A 3,000 L vacuum truck starts from about $170/hr wet or $550/day dry, rising to about $225/hr wet for a 9,000 L truck. Hydro excavation runs about $250–$500/hr, or $2,000–$4,500 for a full day.
What affects vacuum and hydro excavation prices?
Truck size, minimum call-out and spoil disposal usually drive the total. Water usage, travel time and hard or rocky ground can also add hours to the job.
Tree services rates
$60–$120/hr for tree pruning
Tree services rates
$60–$120/hr for tree pruning
Tree service pricing changes with the size and condition of the tree, access, equipment needs and whether removal, pruning or stump work is required.
All rates ex GST and indicative only.
What are typical tree service rates?
| Service type | Indicative rate |
|---|---|
| Tree pruning | $60–$120/hr dry; $80–$150/hr wet |
| Tree removal | $300–$1,500/tree dry; $500–$2,000/tree wet |
| Health assessment | $100–$500/session |
| Emergency tree work | $150–$300/hr dry; $200–$400/hr wet |
| Small stump grinding | $120–$230/stump |
| Large stump grinding | $400–$600/stump |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Tree size and condition
- Access and climbing requirements
- Waste removal
- Stump grinding
- Permits
- Emergency or after-hours work
Licensing and approvals
Many councils protect significant trees, so removal or heavy pruning may need a council permit. Check with your council or arborist before work starts.
Related guides
Tree pruning cost guide · Tree stump removal cost guide · Stump grinding cost guide · Tree lopping
Common questions
How much do tree services cost?
Tree pruning costs about $60–$120/hr dry or $80–$150/hr wet. Removing a tree ranges from $300–$1,500 per tree dry to $500–$2,000 wet, and stump grinding adds $120–$230 for a small stump or $400–$600 for a large one.
What affects tree service prices?
Tree size, condition and access matter most, especially where a climber or crane is needed. Green waste removal, stump grinding, council permits and emergency call-outs are often quoted as extras.
Demolition rates
$80–$300/hr depending on structure size
Demolition rates
$80–$300/hr depending on structure size
Demolition costs vary significantly with structure size, materials, access and the amount of waste that must be removed from site.
All rates ex GST and indicative only.
What are typical demolition rates?
| Service type | Indicative rate |
|---|---|
| Small building | $80–$130/hr wet |
| Medium structure | $140–$200/hr wet |
| Large structure | $210–$300/hr wet |
| Small detached house | $15,000–$17,500/project |
| Residential building | $20,000–$30,000/project |
| Commercial building | $100–$130/m² |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Structure size
- Construction materials
- Asbestos and hazardous materials
- Permits
- Waste disposal
- Site access
Worked example
Demolishing a small building at $80–$130/hr wet over two 8-hour days comes to about $1,280–$2,080 in machine time, before asbestos removal, waste disposal and permits.
Licensing and approvals
Demolition often needs council approval, and some states require a licensed or registered demolisher. Asbestos must be identified before work starts, and any asbestos above the licensing threshold must be removed by a licensed asbestos removalist.
Related guides
Asbestos removal cost guide · Excavator hire rates · Sydney · Melbourne · Brisbane · Perth · Adelaide · Gold Coast · Newcastle
Common questions
How much does demolition cost?
Machine demolition runs about $80–$130/hr for a small building, rising to $210–$300/hr for large structures. Priced as whole projects, a small detached house is about $15,000–$17,500 and a larger residential building $20,000–$30,000, while commercial buildings are often quoted at $100–$130/m².
What affects demolition prices?
Structure size and materials set the base price. Asbestos and other hazardous materials, permits and tip fees can add substantially, so arrange a hazardous materials check before comparing quotes.
Service locating (GPR and utility locating) rates
$140–$300/hr with a locator
Service locating (GPR and utility locating) rates
$140–$300/hr with a locator
Service locating rates depend on the locating technology, site complexity and the level of mapping or reporting required.
All rates ex GST and indicative only.
What are typical service locating rates?
| Service type | Indicative rate |
|---|---|
| Ground penetrating radar (GPR) | $250–$500/day wet; $200–$450/day dry |
| Electromagnetic locator | $150–$350/day wet; $100–$300/day dry |
| Acoustic locator | $100–$280/day wet; $70–$250/day dry |
| Metal detector | $70–$150/day wet; $50–$130/day dry |
| CCTV inspection camera | $300–$600/day wet; $250–$550/day dry |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Equipment type
- Site area
- Number of services
- Surface conditions
- Reporting requirements
- Travel and access
Licensing and approvals
Lodge a free Before You Dig Australia (BYDA) enquiry before any excavation. Locating then confirms those plans on site, so look for locators with CERTLOC certification.
Related guides
Safe excavation starts with BYDA · CERTLOC certification guide · Vacuum and hydro excavation rates · Ground penetrating radar · Underground locating services
Common questions
How much does service locating cost?
A locator typically costs about $140–$200/hr, usually with a 2–4 hour minimum. By the day, GPR runs about $250–$500 wet and electromagnetic locating about $150–$350 wet, with CCTV pipe inspection at $300–$600.
What affects service locating prices?
The technology needed, the size of the area and the number of services to trace drive most of the cost. Formal mapping or reports, hard surfaces and travel can add time.
Water bore drilling rates
$50–$160/metre depending on bore type
Water bore drilling rates
$50–$160/metre depending on bore type
Water bore drilling is commonly priced per metre, with total cost influenced by depth, geology, casing, pump requirements and site access.
All rates ex GST and indicative only.
What are typical water bore drilling rates?
| Service type | Indicative rate |
|---|---|
| Residential bore drilling | $50–$100/metre |
| Agricultural bore drilling | $60–$120/metre |
| Industrial bore drilling | $70–$140/metre |
| Environmental bore drilling | $80–$150/metre |
| Monitoring bore drilling | $90–$160/metre |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Bore depth
- Ground conditions
- Casing
- Pump installation
- Permits
- Water testing
Licensing and approvals
Most states require a permit or licence before a bore is drilled, and the work must be done by a licensed water bore driller. Check with your state water authority first.
Related guides
Drilling and core drilling rates · Drilling contractors · Drill rig hire
Common questions
How much does water bore drilling cost?
Residential bores typically cost about $50–$100 per metre to drill, agricultural bores $60–$120 and industrial bores $70–$140. Environmental and monitoring bores sit higher at $80–$160 per metre.
What affects water bore drilling prices?
Depth has the biggest effect because drilling is charged per metre. Hard or unstable ground, casing, pump installation, permits and water testing are usually added to the drilling cost.
Piling and screw piles rates
$350–$550/pile for standard screw pile installation
Piling and screw piles rates
$350–$550/pile for standard screw pile installation
Piling costs are driven by pile size, installation conditions and structural load requirements, with mobilisation and testing often quoted separately.
All rates ex GST and indicative only.
What are typical piling and screw pile rates?
| Service type | Indicative rate |
|---|---|
| Small screw pile | $60–$90/metre |
| Medium screw pile | $90–$130/metre |
| Large screw pile | $130–$180/metre |
| Standard installation | $350–$550/pile |
| Difficult terrain installation | $550–$750/pile |
| Heavy load-bearing installation | $750+/pile |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Pile size and length
- Soil conditions
- Load requirements
- Site access
- Mobilisation
- Testing and engineering
Licensing and approvals
Piles are normally specified by a structural engineer, often after a geotechnical investigation, and installed to the approved design.
Related guides
Screw piles · Piling contractors · Bored piers · Geotechnical drilling Sydney · Melbourne · Perth
Common questions
How much do piling and screw piles cost?
Standard screw pile installation costs about $350–$550 per pile, rising to $550–$750 in difficult terrain and $750+ for heavy load-bearing piles. Priced by length, screw piles run from about $60–$90 per metre for small piles to $130–$180 per metre for large ones.
What affects piling and screw pile prices?
Pile size, length and the loads they must carry set the base price, and soft or rocky ground can slow installation. Mobilising the rig, engineering design and load testing are often quoted separately.
Mobile welders rates
$70–$160/hr for basic welding
Mobile welders rates
$70–$160/hr for basic welding
Mobile welding rates vary with the welding process, material, complexity and whether the job requires urgent or specialist on-site work.
All rates ex GST and indicative only.
What are typical mobile welder rates?
| Service type | Indicative rate |
|---|---|
| Basic welding | $70–$160/hr |
| Advanced repair work | $180–$290/hr |
| Fabrication projects | From $230/hr |
| On-site consultation | About $100/hr |
| Emergency welding | $250–$350/hr |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Welding process
- Material type
- Job complexity
- Travel and call-out
- Consumables
- After-hours work
Licensing and approvals
Structural steel welding is generally carried out to AS/NZS 1554, and hot work on an active site usually needs a hot work permit.
Related guides
Boilermaker rates · Welding and fabrication · Steel fabrication · Welding equipment hire
Common questions
How much does a mobile welder cost?
Basic mobile welding typically costs $70–$160/hr. Advanced repairs run about $180–$290/hr, fabrication projects start from about $230/hr and emergency call-outs cost $250–$350/hr.
What affects mobile welder prices?
The welding process and material matter most, with aluminium, stainless steel and coded work usually costing more than standard mild steel. Travel, consumables and after-hours call-outs are often charged on top.
Mobile truck mechanics rates
$140–$220/hr
Mobile truck mechanics rates
$140–$220/hr
Mobile truck mechanic pricing reflects labour, travel, diagnostics and the complexity of repairing heavy vehicles away from a workshop.
All rates ex GST and indicative only.
What are typical mobile truck mechanic rates?
| Service type | Indicative rate |
|---|---|
| Mobile truck mechanic | $140–$220/hr |
| Diesel mechanic | $120–$200/hr |
| Mobile diesel mechanic | $130–$210/hr |
| Diesel fitter | $100–$180/hr |
| Diesel servicing | $110–$190/hr |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Repair complexity
- Vehicle type
- Diagnostics
- Travel and call-out
- Parts and fluids
- Emergency response
Related guides
Diesel mechanic rates · Diesel mechanic cost guide · Mobile diesel mechanics · Diesel services
Common questions
How much does a mobile truck mechanic cost?
A mobile truck mechanic typically charges $140–$220/hr. Diesel fitters ($100–$180/hr) and diesel servicing ($110–$190/hr) can be cheaper options for routine maintenance.
What affects mobile truck mechanic prices?
Complex repairs and diagnostics take longer, and heavy vehicles need specialist tools. Call-out distance, parts and fluids, and emergency roadside response all add to the bill.
Land clearing rates
$40–$150/m³ for residential clearing
Land clearing rates
$40–$150/m³ for residential clearing
Land clearing rates depend on vegetation density, terrain, disposal requirements and the machinery needed to clear and prepare the site.
All rates ex GST and indicative only.
What are typical land clearing rates?
| Service type | Indicative rate |
|---|---|
| Residential land clearing | $40–$150/m³ |
| Professional excavation services | $70–$300/hr |
| Small excavation combo | $95–$105/hr |
| Excavator and tip truck job | $140–$170/hr |
| Soil removal | $30–$50/m³ |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Vegetation density
- Site area
- Terrain
- Equipment required
- Green waste disposal
- Access and mobilisation
Licensing and approvals
Clearing native vegetation usually needs approval from your council or state government, and the rules differ between states. Check before you book a contractor.
Related guides
Land clearing cost guide · Mulcher hire rates · Excavator hire rates · Tree clearing · Tree mulching
Common questions
How much does land clearing cost?
Residential land clearing typically costs $40–$150/m³ of material removed. If you hire the gear by the hour, a small excavation combo runs about $95–$105/hr and an excavator with tip truck $140–$170/hr, with soil removal at $30–$50/m³.
What affects land clearing prices?
Dense vegetation, large trees and steep or rocky terrain take longer to clear. Green waste disposal and getting machinery to site are often significant extras, so ask whether mulching on site is an option.
Concreting, cutting, grinding and repair rates
$75–$150/m² for a concrete slab
Concreting, cutting, grinding and repair rates
$75–$150/m² for a concrete slab
Concrete pricing varies by the type of work, finish, thickness and site conditions, so comparing like-for-like scopes is important.
All rates ex GST and indicative only.
What are typical concreting rates?
| Service type | Indicative rate |
|---|---|
| Plain concrete | $60–$85/m² basic |
| Concrete slabs | $75–$150/m² |
| Concrete repair and patch | $50–$70/m² basic |
| Concrete cutting | $15–$40/m² |
| Concrete grinding | $10–$60/m² |
| Concrete removal | $30–$50/m² |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Concrete type and finish
- Area and thickness
- Reinforcement
- Site preparation
- Access and pumping
- Cutting or repair complexity
Worked example
A 30 m² slab at $75–$150/m² comes to about $2,250–$4,500, before site preparation, pumping and GST.
Licensing and approvals
Residential slabs and footings are designed to AS 2870, and new slabs normally form part of an approved building design.
Related guides
How thick should a concrete slab be? · Coloured concrete costs · Concrete pump hire rates · Agitator truck hire rates · Concrete cutting Sydney · Concrete cutting Brisbane · Slab concreters
Common questions
How much does concrete work cost?
A concrete slab typically costs $75–$150/m², with plain concrete from about $60–$85/m². Repairs run about $50–$70/m², cutting $15–$40/m², grinding $10–$60/m² and removal $30–$50/m².
What affects concreting prices?
Finish, thickness and reinforcement set the base price per square metre. Site preparation, pumping on sites without truck access and the complexity of cutting or repair work can all add to it.
Hydraulic hose repairs rates
$110–$140/hr
Hydraulic hose repairs rates
$110–$140/hr
Hydraulic hose repair costs combine labour, call-out time and replacement parts, with urgent breakdown work often attracting additional charges.
All rates ex GST and indicative only.
What are typical hydraulic hose repair rates?
| Service type | Indicative rate |
|---|---|
| On-site call-out | $150–$200 |
| On-site labour | $110–$140/hr |
| Hydraulic hose replacement | $60–$250/hose |
| Emergency after-hours service | $180–$250/hr |
| Diagnostic and testing | $140–$200 |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Hose size and pressure rating
- Parts and fittings
- Call-out distance
- Emergency response
- Diagnostics
- Fluid disposal
Related guides
Diesel mechanic rates · Mobile hydraulic repairs · Hose Doctor
Common questions
How much do hydraulic hose repairs cost?
Expect a call-out fee of about $150–$200 plus $110–$140/hr on-site labour. Replacement hoses cost about $60–$250 each, and after-hours emergency work runs $180–$250/hr.
What affects hydraulic hose repair prices?
Hose size, pressure rating and fittings drive the parts cost. Distance to site, emergency response and any diagnostics or fluid disposal add to the labour side.
Excavation and earthworks rates
$70–$300/hr for professional excavation
Excavation and earthworks rates
$70–$300/hr for professional excavation
Earthworks can be charged hourly, by volume or by project, depending on the machinery, material movement and scope involved.
All rates ex GST and indicative only.
What are typical excavation and earthworks rates?
| Service type | Indicative rate |
|---|---|
| Professional excavation | $70–$300/hr |
| Small excavation combo | $95–$105/hr |
| 6 t excavator wet hire | $105–$130/hr |
| Excavator and tip truck | $140–$170/hr |
| Soil removal | $30–$50/m³ |
| House foundation excavation | $800–$15,000/task |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Machine size
- Ground conditions
- Haul distance
- Spoil removal
- Site access
- Project scale
Worked example
A small excavation combo at $95–$105/hr for an 8-hour day comes to about $760–$840. Removing 20 m³ of spoil at $30–$50/m³ adds roughly $600–$1,000, before float and GST. House foundation excavation ranges widely ($800–$15,000) because it depends on footprint, depth and soil, so get a site-specific quote.
Licensing and approvals
Lodge a free Before You Dig Australia (BYDA) enquiry before digging. Trenches deeper than 1.5 m are high risk construction work, so they need a safe work method statement (SWMS) and protection such as shoring, benching or battering.
Related guides
Excavator hire rates · Mini excavator hire rates · How excavator hire rates are structured · SWMS for mobile plant hire · Earthworks Sydney · Gold Coast · Perth · Bulk earthworks · Soil disposal
Common questions
How much do excavation and earthworks cost?
Most excavation is charged by the hour, from about $70–$300/hr depending on machine size. A small excavation combo runs about $95–$105/hr, a 6 t excavator on wet hire $105–$130/hr and an excavator with tip truck $140–$170/hr, while soil removal is usually priced at $30–$50/m³.
What affects excavation and earthworks prices?
Machine size and ground conditions set the hourly rate and how fast work progresses, especially in rock or heavy clay. Haul distance and spoil removal can add significantly, so confirm where spoil is going before comparing quotes.
Surveying and engineering consultants rates
$110–$300/hr depending on discipline
Surveying and engineering consultants rates
$110–$300/hr depending on discipline
Consulting rates vary by discipline, seniority and project complexity, with larger scopes often quoted as a project fee rather than purely hourly.
All rates ex GST and indicative only.
What are typical surveying and engineering consultant rates?
| Service type | Indicative rate |
|---|---|
| Civil engineering consultant | $120–$190/hr |
| Electrical engineering consultant | $110–$180/hr |
| Environmental engineering consultant | $150–$210/hr |
| Engineering surveyor | $130–$180/hr |
| Mechanical engineering consultant | $110–$180/hr |
| Structural engineering consultant | $150–$300/hr |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Discipline and expertise
- Project complexity
- Site investigations
- Travel
- Software and equipment
- Reports and approvals
Licensing and approvals
Boundary (cadastral) surveys must be done by a registered or licensed surveyor, and some states require engineers to be registered, such as RPEQ in Queensland.
Related guides
Surveyor cost guide · Types of surveying and their costs · Land surveyors · Cadastral surveyors · Structural engineering consultants
Common questions
How much do surveying and engineering consultants cost?
Engineering surveyors typically charge $130–$180/hr and civil engineering consultants $120–$190/hr. Structural engineers sit at the top of the range at $150–$300/hr, with environmental consultants at $150–$210/hr.
What affects surveying and engineering consultant prices?
Discipline and seniority set the hourly rate, while project complexity, site investigations and the reports or approvals needed decide how many hours a job takes. Larger scopes are often quoted as a fixed project fee.
Drilling contractors and core drilling rates
$50–$150/hole for small concrete cores
Drilling contractors and core drilling rates
$50–$150/hole for small concrete cores
Drilling rates depend heavily on diameter, depth, material and drilling method, so the most useful pricing unit changes by project type.
All rates ex GST and indicative only.
What are typical drilling and core drilling rates?
| Service type | Indicative rate |
|---|---|
| Small concrete core ≤50 mm | $50–$150/hole |
| Medium core 50–150 mm | $150–$350/hole |
| Large core 150–300 mm+ | From $500/hole |
| Drilling equipment | $100–$180/hr |
| Diamond drilling | $50–$150/metre |
| RC drilling | $30–$100/metre |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Hole diameter and depth
- Drilling method
- Ground or concrete conditions
- Equipment
- Site access
- Travel and disposal
Licensing and approvals
Before core drilling through slabs, scan for post-tensioned cables, reinforcement and services (for example with GPR), and get engineer sign-off for cores through structural elements.
Related guides
Service locating rates · Water bore drilling rates · Geotechnical drilling Sydney · Melbourne · Perth · Core drilling · Geotechnical drilling
Common questions
How much does drilling and core drilling cost?
Core drilling through concrete costs about $50–$150 per hole for cores up to 50 mm, $150–$350 for 50–150 mm and from $500 for large cores. Ground drilling is usually priced per metre, from $30–$100 for RC drilling to $50–$150 for diamond drilling.
What affects drilling and core drilling prices?
Hole diameter, depth and the drilling method set the base price. Reinforced concrete or hard rock, tight access and slurry or spoil disposal can add time and cost.
Kerb and channel rates
$50–$200/metre depending on project type
Kerb and channel rates
$50–$200/metre depending on project type
Kerb and channel work is commonly priced per metre, with excavation, drainage, traffic management and project scale affecting the installed cost.
All rates ex GST and indicative only.
What are typical kerb and channel rates?
| Service type | Indicative rate |
|---|---|
| Residential kerb and channel | $50–$75/metre |
| Commercial kerb and channel | $75–$100/metre |
| Industrial kerb and channel | $100–$150/metre |
| Civil kerb and channel | $150–$200/metre |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Project length
- Kerb profile
- Excavation
- Reinforcement
- Traffic control
- Drainage and access
Licensing and approvals
Kerb and channel on public roads usually needs council approval and must meet council or road authority specifications.
Related guides
Traffic control rates · Concreting rates · Kerbing machine hire · Stormwater drainage
Common questions
How much does kerb and channel cost?
Residential kerb and channel typically costs $50–$75 per metre, rising to $75–$100 for commercial work, $100–$150 for industrial and $150–$200 per metre for civil projects.
What affects kerb and channel prices?
Length and kerb profile set the base rate, with longer runs usually cheaper per metre. Excavation, reinforcement, drainage connections and traffic control on live roads add to the installed cost.
Hydroseeding rates
$400–$600 for up to 100 m²
Hydroseeding rates
$400–$600 for up to 100 m²
Hydroseeding pricing is strongly influenced by area, slope, seed mix and site preparation, with larger areas usually achieving a lower effective rate per square metre.
All rates ex GST and indicative only.
What are typical hydroseeding rates?
| Area | Indicative rate |
|---|---|
| Up to 100 m² | $400–$600/project |
| 101–250 m² | $700–$1,100/project |
| 251–500 m² | $1,100–$1,800/project |
| 501–1,000 m² | $1,800–$3,300/project |
| 1,001–1,500 m² | $2,600–$4,500/project |
| 1,501–2,000 m² | $3,300–$5,500/project |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Area
- Slope
- Seed mix
- Mulch and soil amendments
- Water supply
- Site preparation
Related guides
Hydroseeding cost guide · Hydroseeding guide and tips · Perth · Brisbane · Melbourne · Hydromulching · Revegetation
Common questions
How much does hydroseeding cost?
Hydroseeding up to 100 m² costs about $400–$600, rising to $1,800–$3,300 for 501–1,000 m² and $3,300–$5,500 for 1,501–2,000 m². Larger areas cost less per square metre.
What affects hydroseeding prices?
Area has the biggest effect, followed by slope and the seed mix. Mulch, soil amendments, water supply and any site preparation are often added on top.
Septic and liquid waste rates
$150–$200/hr for septic tank pumping
Septic and liquid waste rates
$150–$200/hr for septic tank pumping
Liquid waste pricing depends on the waste stream, volume, disposal requirements and travel, with hazardous material requiring more specialised handling.
All rates ex GST and indicative only.
What are typical septic and liquid waste rates?
| Service type | Indicative rate |
|---|---|
| Septic tank pumping | $150–$200/hr |
| Grease trap cleaning | $100–$150/hr |
| Industrial waste disposal | $180–$250/hr |
| Hazardous liquid waste removal | $200–$300/hr |
| Septic pump-out | $250–$400/service |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Waste type
- Volume
- Disposal fees
- Mobilisation
- Site access
- Emergency response
Licensing and approvals
New or replacement septic systems need council approval, and liquid waste must be carried by a licensed or permitted transporter to an approved disposal facility.
Related guides
Septic tank pump-out costs · How often to empty a septic tank · Fibreglass vs concrete septic tanks · Liquid waste removal · Grease trap cleaning
Common questions
How much does septic and liquid waste removal cost?
A septic tank pump-out typically costs $250–$400 per service, or $150–$200/hr where it is charged hourly. Grease trap cleaning runs about $100–$150/hr, industrial waste $180–$250/hr and hazardous liquid waste $200–$300/hr.
What affects septic and liquid waste prices?
The type and volume of waste matter most, because disposal fees at licensed facilities are passed on. Travel, difficult access to the tank and emergency call-outs also add to the price.
Bulk and heavy haulage rates
$120–$240/hr wet hire
Bulk and heavy haulage rates
$120–$240/hr wet hire
Bulk and heavy haulage may be priced hourly, per tonne or per load depending on the cargo, distance and compliance requirements.
All rates ex GST and indicative only.
What are typical bulk and heavy haulage rates?
| Service type | Indicative rate |
|---|---|
| Small heavy haulage up to 50 t | $120–$150/hr wet |
| Medium heavy haulage 50–100 t | $150–$190/hr wet |
| Large heavy haulage 100 t+ | $200–$240/hr wet |
| Short mineral haulage | $20–$30/tonne |
| Long mineral haulage | $30–$50/tonne |
| Short liquid haulage | $500–$1,000/load |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Load weight and dimensions
- Distance
- Permits
- Escort vehicles
- Route constraints
- Loading and waiting time
Licensing and approvals
Oversize or overmass loads need permits and sometimes pilot or escort vehicles. Permits are issued through the NHVR in most states, and by Main Roads WA and the NT Government in those jurisdictions.
Related guides
Prime mover and low loader hire rates · Tipper truck hire rates · Low loader hire Brisbane · Newcastle · Perth · Heavy haulage · Float hire
Common questions
How much does bulk and heavy haulage cost?
Heavy haulage typically costs $120–$150/hr for loads up to 50 t, $150–$190/hr for 50–100 t and $200–$240/hr for 100 t+. Bulk minerals are often priced per tonne ($20–$30 for short hauls, $30–$50 for long hauls), and liquid loads at $500–$1,000 per load for short trips.
What affects bulk and heavy haulage prices?
Load weight and dimensions decide the truck and trailer needed, and oversize loads add permits, escorts and route planning. Distance, loading time and waiting on site are the other big variables.
Boilermakers rates
$50–$150/hr depending on work type
Boilermakers rates
$50–$150/hr depending on work type
Boilermaker rates vary with the level of fabrication skill, certification, materials and whether the work is completed in a workshop or on site.
All rates ex GST and indicative only.
What are typical boilermaker rates?
| Service type | Indicative rate |
|---|---|
| Boiler fabrication | $50–$100/hr |
| Pressure vessel repair | $80–$150/hr |
| Structural welding | $60–$120/hr |
| Metal fabrication | $70–$130/hr |
| Industrial maintenance | $70–$140/hr |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Trade specialisation
- Materials
- Coded welding requirements
- Travel
- Equipment
- Urgency and overtime
Licensing and approvals
Structural welding is generally carried out to AS/NZS 1554, and pressure vessel work usually needs coded welders and independent inspection.
Related guides
Mobile welder rates · Metal fabrication · Steel fabrication · Aluminium fabrication
Common questions
How much does a boilermaker cost?
Boilermakers typically charge $50–$100/hr for boiler fabrication, $60–$120/hr for structural welding and $70–$130/hr for metal fabrication. Pressure vessel repairs sit higher at $80–$150/hr.
What affects boilermaker prices?
Specialisation and coded welding requirements push rates up, as do higher-grade materials. Travel to site, equipment and urgent or overtime work add to the final bill.
Concrete recycling rates
$100–$140/tonne for collection, crushing and delivery
Concrete recycling rates
$100–$140/tonne for collection, crushing and delivery
Concrete recycling rates depend on whether the job covers collection, crushing, disposal or delivery of recycled material, as well as the volume and contamination level.
All rates ex GST and indicative only.
What are typical concrete recycling rates?
| Service type | Indicative rate |
|---|---|
| On-site concrete collection | $60–$80/tonne |
| Concrete crushing and recycling | $30–$40/tonne |
| Delivery of recycled concrete | $20–$40/tonne |
| Full service package | $100–$140/tonne |
| Crusher dust | $20–$30/tonne |
| Recycled road base | $30–$40/tonne |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Concrete cleanliness
- Volume
- Transport
- Crushing requirements
- Contamination
- Delivery distance
Related guides
Concrete recycling cost guide · Can concrete be recycled? · Crushed rock cost guide · Crushed concrete · Road base
Common questions
How much does concrete recycling cost?
A full service covering collection, crushing and delivery typically costs $100–$140/tonne. Priced separately, collection runs about $60–$80/tonne and crushing $30–$40/tonne, while recycled road base costs $30–$40/tonne and crusher dust $20–$30/tonne.
What affects concrete recycling prices?
Clean concrete free of steel, timber and soil is cheaper to process, while contamination increases sorting and disposal costs. Volume, transport and delivery distance also affect the per-tonne rate.
Line marking rates
$6–$30/metre for standard to thermoplastic marking
Line marking rates
$6–$30/metre for standard to thermoplastic marking
Line marking is usually priced by linear metre, but material choice, surface preparation and traffic management can materially change the final project cost.
All rates ex GST and indicative only.
What are typical line marking rates?
| Service type | Indicative rate |
|---|---|
| Basic line marking | $6–$12/linear metre |
| Thermoplastic line marking | $15–$30/linear metre |
| Reflective line marking | $12–$22/linear metre |
| Custom designs and logos | $25–$45/linear metre or symbol |
| Removal of existing markings | $6–$12/linear metre |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Marking material
- Surface preparation
- Traffic management
- Project size
- Custom layouts
- After-hours work
Licensing and approvals
Car park layouts generally follow AS 2890, and line marking on public roads must meet your state road authority’s standards.
Related guides
Traffic control rates · Road construction · Traffic management plans
Common questions
How much does line marking cost?
Basic line marking typically costs $6–$12 per linear metre, reflective marking $12–$22 and thermoplastic $15–$30. Custom designs and logos run $25–$45 per metre or symbol, and removing old markings costs about $6–$12 per metre.
What affects line marking prices?
The marking material has the biggest effect, with thermoplastic costing more than paint but lasting longer. Surface preparation, traffic management on live roads and after-hours work can add to the job.
Traffic control rates
$50–$70/hr per traffic controller
Traffic control rates
$50–$70/hr per traffic controller
Traffic control quotes combine labour, equipment, vehicles and planning, with crew size and shift conditions driving much of the final cost.
All rates ex GST and indicative only.
What are typical traffic control rates?
| Service type | Indicative rate |
|---|---|
| Traffic controller | $50–$70/hr per person |
| Equipment hire | $15–$35/item/day |
| Mobilisation and setup | $60–$170/day |
| Traffic control vehicle | $160–$350/day |
| Planning and permits | $250–$1,200 one-off |
| Emergency response setup | $600–$1,800/setup |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Crew size
- Shift length
- Equipment
- Traffic management plan
- Vehicles
- Night or emergency work
Licensing and approvals
Traffic controllers must hold the ticket or accreditation required by your state road authority, and work on roads needs an approved traffic management plan or traffic guidance scheme.
Related guides
VMS board hire rates · Traffic management plans · VMS board hire · Road barrier hire
Common questions
How much does traffic control cost?
Each traffic controller typically costs $50–$70/hr, with a traffic control vehicle at $160–$350/day and equipment such as signs and barriers at $15–$35 per item per day. Planning and permits are usually a one-off $250–$1,200.
What affects traffic control prices?
Crew size and shift length drive most of the cost. The traffic management plan, vehicles, equipment and night or emergency work add to it.
Retaining walls and rock pitching rates
$150–$500/m² depending on wall type
Retaining walls and rock pitching rates
$150–$500/m² depending on wall type
Retaining wall and rock pitching costs vary with wall height, materials, engineering, excavation and drainage requirements.
All rates ex GST and indicative only.
What are typical retaining wall and rock pitching rates?
| Service type | Indicative rate |
|---|---|
| Block retaining wall | $250–$450/m² |
| Rock retaining wall | $200–$350/m² |
| Gabion retaining wall | $300–$500/m² |
| Boulder retaining wall | $150–$300/m² |
| Concrete sleeper wall | $200–$400/m² |
| Premium cut sandstone rock wall | $280–$500/m² |
Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.
What can affect the price
- Wall height
- Material type
- Excavation
- Drainage
- Engineering
- Site access
Licensing and approvals
Walls above about 1 m high (the threshold varies by council) usually need engineering design and may need building approval. Walls near boundaries or supporting structures can also need approval.
Related guides
Retaining wall cost guide · Concrete retaining wall cost guide · Types of retaining walls · Block retaining walls · Rock retaining walls · Retaining wall builders
Common questions
How much do retaining walls and rock pitching cost?
Retaining walls typically cost $150–$300/m² for boulder walls, $200–$350/m² for rock and $200–$400/m² for concrete sleepers. Block walls run about $250–$450/m², with gabion and premium cut sandstone walls up to $500/m².
What affects retaining wall and rock pitching prices?
Wall height matters most, because taller walls need engineering, deeper footings and more drainage. Material choice, excavation and site access make up most of the rest.
Are your services earning these rates?
List your business on iseekplant. Get job requests from local customers and set your own rates. Join 34,000 suppliers already listed.
Construction service FAQs
How much do construction services cost in Australia?
Costs vary depending on the trade, location and project scope. Some services are charged hourly, while others are priced by the metre, square metre, tonne, load or complete job.
Are construction services usually charged by the hour?
Some are. Mobile mechanics, welders and other specialist trades commonly use hourly rates, while services such as drilling, concreting and line marking may use different pricing units.
Does the service rate include equipment?
It depends on the contractor. Some rates include the required plant or machinery, while others itemise equipment separately.
Are materials included in construction service rates?
Not always. Materials such as concrete, asphalt, steel and replacement parts may be charged separately.
Do contractors charge for travel?
They can. Travel, call-out, mobilisation and demobilisation charges may apply, particularly for remote or regional projects.
Are minimum charges common?
Yes. Some contractors apply minimum hire periods, minimum labour hours or call-out charges for smaller jobs.
Are construction service rates ex GST?
Yes. All rates in this guide are ex GST unless otherwise stated. Confirm GST and any travel, call-out or materials charges on your final quote.
What affects construction service pricing?
Labour, equipment, materials, travel, project size, site access, working conditions and location can all influence the final price.
How we calculate these rates
The rates in this guide are based on current Australian contractor pricing, supplier rate information and services available through the iseekplant marketplace.
Because different trades use different pricing models, rates are compared using the unit that best reflects how each service is normally charged, such as per hour, per metre, per square metre, per tonne or per project.
Hiring or listing, start here
Compare quotes from local contractors, or put your services in front of customers. Both are free.