search
Search Constructionsht
    search
    Search Constructionsht

      Australian construction service rates (2026)

      How much should you be paying for construction services? Compare 2026 rates for earthworks, demolition, concreting, welding, drilling and 20+ other services across Australia.

      By Drew McPherson · Last updated 8 October 2026 · Rates reviewed every 6 months

      Free download

      Download the 2026 construction services rates matrix

      Need a clearer picture of what different construction services can cost? Download the 2026 rates matrix to compare common pricing units, indicative rates, minimum charges and other costs that may affect your project budget.

      Get real quotes for your job

      Tell us the service you need and where. Local contractors send you prices, free.

      • Trades and specialist contractors
      • Contractors servicing your area
      • No obligation

      Construction service pricing can vary widely depending on the trade, project scope, location and how the work is charged. Some contractors work on hourly rates, while others price by the metre, square metre, tonne, load or complete project. Rates are indicative and shown ex GST unless otherwise stated.

      Construction service rates across Australia

      Service Typical rate
      Diesel mechanics $80–$120/hr for basic servicing
      Asphalt contractors $30–$45/m² for residential asphalting
      Vacuum and hydro excavation $170–$350/hr wet hire depending on truck size and crew
      Tree services $60–$120/hr for tree pruning
      Demolition $80–$300/hr depending on structure size
      Service locating / GPR $140–$300/hr with a locator
      Water bore drilling $50–$160/metre depending on bore type
      Piling and screw piles $350–$550/pile for standard screw pile installation
      Mobile welders $70–$160/hr for basic welding
      Mobile truck mechanics $140–$220/hr
      Land clearing $40–$150/m³ for residential clearing
      Concreting $75–$150/m² for a concrete slab
      Hydraulic hose repairs $110–$140/hr
      Excavation and earthworks $70–$300/hr for professional excavation
      Surveying and engineering consultants $110–$300/hr depending on discipline
      Drilling contractors $50–$150/hole for small concrete cores
      Kerb and channel $50–$200/metre depending on project type
      Hydroseeding $400–$600 for up to 100 m²
      Septic and liquid waste $150–$200/hr for septic tank pumping
      Bulk and heavy haulage $120–$240/hr wet hire
      Boilermakers $50–$150/hr depending on work type
      Concrete recycling $100–$140/tonne for collection, crushing and delivery
      Line marking $6–$30/metre for standard to thermoplastic marking
      Traffic control $50–$70/hr per traffic controller
      Retaining walls and rock pitching $150–$500/m² depending on wall type

      Source: Indicative rates based on current Australian contractor pricing, supplier information and services available through the iseekplant marketplace. Actual pricing varies by location, scope and site requirements.

      Need a contractor?

      Find experienced contractors for your next project and compare quotes from suppliers servicing your area.

      Get free quotes

      Provide construction services?

      Connect with customers actively searching for contractors, trades and specialist construction services.

      List your business

      How are construction services priced?

      There is no single pricing model for construction services. The way a job is charged usually depends on the type of work, the resources required and how easily the project can be measured.

      Hourly rates

      Many mobile trades and specialist contractors charge by the hour. This is common for diesel mechanics, welders, boilermakers and some excavation services. Minimum hours, call-out fees and travel costs may also apply.

      Per metre or square metre

      Services that can be measured consistently are often priced by length or area. This may include drilling, kerbing, line marking, concreting and certain demolition works.

      Per tonne or load

      Haulage, waste removal and recycling services may be priced according to weight, truck load, distance travelled or a combination of these factors.

      Fixed project pricing

      Some jobs are better suited to a complete project quote. Contractors may assess labour, equipment, materials, access and site conditions before providing a final price.

      What affects construction service costs?

      The advertised rate is only part of the overall project cost. A range of practical factors can influence the final quote.

      Minimum charges and call-outs

      Short jobs may still attract a minimum booking period or call-out fee, particularly for mobile trades and specialist services.

      Labour requirements

      Jobs that require larger crews, specialist trades, supervisors or additional site personnel will generally cost more than work completed by a single operator.

      Plant and equipment

      Some service rates include machinery, while others charge plant separately. Check what is included before comparing contractor quotes.

      Materials

      Concrete, asphalt, steel, replacement parts, aggregates and other materials may sit outside the labour rate and be added to the final cost.

      Travel and mobilisation

      Long-distance travel, remote sites and specialist equipment can add mobilisation and demobilisation costs to the project.

      Site access and conditions

      Restricted access, difficult terrain, underground services, traffic management and additional safety requirements can all increase the time and resources needed.

      After-hours work

      Night work, weekends, public holidays and urgent call-outs may attract higher rates or additional labour charges.

      GST

      Rates in this guide are presented ex GST unless otherwise stated, making it easier to compare pricing across different suppliers.

      Explore construction service rates

      Browse indicative pricing for some of the most commonly requested construction and trade services across Australia. Each service follows the same pattern: a quick rate summary, the rate table, price factors, common questions and two next steps: get quotes if you’re hiring, or list your business if you provide the service.

      Hiring a machine rather than a contractor? Compare machine hire rates for excavators, dozers, cranes and 30+ other machines.

      Diesel mechanic rates

      $80–$120/hr for basic servicing

      Diesel mechanic rates vary by service type, job complexity, location, travel requirements and whether the work is completed in a workshop or on site.

      All rates ex GST and indicative only.

      What are typical diesel mechanic rates?

      Service type Indicative hourly rate
      Basic diesel engine service $80–$120/hr
      Preventive maintenance $70–$130/hr
      Advanced diagnostics and repairs $100–$200/hr
      Emergency repairs $120–$250/hr
      Mobile diesel mechanic $130–$210/hr

      Source: Indicative rates based on current Australian diesel mechanic pricing and service information published through the iseekplant platform. Actual rates vary by location, equipment type, travel and job requirements.

      What can affect the price

      • Type of repair: Routine servicing and maintenance generally cost less than advanced diagnostics, major component repairs or engine overhauls.
      • Mobile call-out: On-site diesel mechanic services may attract a call-out charge or a higher hourly rate to cover travel and mobile servicing costs.
      • Emergency repairs: Urgent breakdowns can attract higher labour rates, particularly for after-hours, weekend or public holiday work.
      • Travel: Travel charges may apply for regional, remote or difficult-to-access sites and can increase the final service cost.
      • Parts and materials: Replacement parts, fluids, filters and other consumables are generally additional to the mechanic’s labour rate.
      • Equipment type: Heavy construction, mining and transport equipment may require specialist diagnostics, tooling and experience, which can affect the final rate.

      Related guides

      Diesel mechanic cost guide · Mobile truck mechanic rates · Mobile diesel mechanics · Diesel fitters

      Common questions

      How much does a diesel mechanic cost per hour?

      Diesel mechanic rates vary by the type of work. Basic engine servicing is typically around $80–$120 per hour, while advanced diagnostics and major repairs can range from approximately $100–$200 per hour.

      How much does a mobile diesel mechanic cost?

      Indicative mobile diesel mechanic rates can range from around $130–$210 per hour, depending on location, travel, equipment type and the work required.

      How much does an emergency diesel repair cost?

      Emergency repair rates can range from approximately $120–$250 per hour, with urgent or after-hours call-outs sometimes attracting additional charges.

      Do diesel mechanics charge a call-out fee?

      They can. Mobile mechanics may charge for travel, call-out time or mobilisation, particularly for regional and remote sites.

      Are parts included in the hourly rate?

      Usually not. Parts, filters, oils, fluids and other materials may be added separately to the labour charge.

      Can diesel mechanics service heavy machinery on site?

      Yes. Many mobile diesel mechanics service construction, mining and transport equipment directly on site, depending on access and the work required.

      Are diesel mechanic rates ex GST?

      Yes. All rates in this guide are ex GST unless otherwise stated. Confirm GST and any travel, call-out, parts or after-hours charges on the final quote.

      What affects diesel mechanic pricing?

      Job complexity, mechanic experience, equipment type, parts, travel distance, location, urgency and whether the work is completed on site can all affect the final cost.

      Asphalt contractors, repairs and driveways rates

      $30–$45/m² for residential asphalting

      Asphalt pricing is usually measured by area, with preparation and finish requirements having a major influence on the final quote.

      All rates ex GST and indicative only.

      What are typical asphalt rates?

      Service type Indicative rate
      Residential driveways $30–$45/m²
      Commercial parking lots $35–$55/m²
      Road surfacing $40–$65/m²
      Asphalt repair and maintenance $25–$40/m²
      Asphalt resurfacing $45–$75/m²
      Asphalt sealing $20–$35/m²

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Project area and asphalt thickness
      • Base preparation
      • Material transport
      • Drainage and edge finishing
      • Site access
      • Project management

      Related guides

      Asphalting cost guide · Asphalt driveways · Asphalt repairs · Bitumen sealing

      Common questions

      How much does asphalt work cost?

      Residential driveways typically cost $30–$45/m² and commercial car parks $35–$55/m². Road surfacing ($40–$65/m²) and resurfacing ($45–$75/m²) cost more, while sealing an existing surface is cheaper at about $20–$35/m².

      What affects asphalt prices?

      Area and asphalt thickness set the base price, but base preparation, drainage work and edge finishing can add significantly to a quote. Small jobs often cost more per square metre because the crew, plant and materials still need to be brought to site.

      Vacuum and hydro excavation (NDD) rates

      $170–$350/hr wet hire depending on truck size and crew

      Vacuum and hydro excavation rates depend on truck capacity, crew requirements, disposal cycles and the precision required around underground services.

      All rates ex GST and indicative only.

      What are typical vacuum and hydro excavation rates?

      Service type Indicative rate
      1,000 L vacuum trailer From $500/day dry
      3,000 L vacuum truck From $550/day dry; from $170/hr wet
      6,000 L vacuum truck From $625/day dry; from $200/hr wet
      9,000 L vacuum truck From $650/day dry; from $225/hr wet
      Hydro excavation About $250–$500/hr
      Hydro excavation full day $2,000–$4,500/day

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Truck capacity
      • Minimum call-out
      • Spoil disposal
      • Water usage
      • Travel time
      • Soil and site conditions

      Licensing and approvals

      Start every job with a free Before You Dig Australia (BYDA) enquiry. Asset owners may require services near your dig to be exposed by non-destructive digging before any mechanical excavation.

      Related guides

      Vacuum truck hire rates · Vacuum truck hire rates guide · Brisbane · Perth · Newcastle · Geelong · Hydro excavation

      Common questions

      How much does vacuum and hydro excavation cost?

      A 3,000 L vacuum truck starts from about $170/hr wet or $550/day dry, rising to about $225/hr wet for a 9,000 L truck. Hydro excavation runs about $250–$500/hr, or $2,000–$4,500 for a full day.

      What affects vacuum and hydro excavation prices?

      Truck size, minimum call-out and spoil disposal usually drive the total. Water usage, travel time and hard or rocky ground can also add hours to the job.

      Tree services rates

      $60–$120/hr for tree pruning

      Tree service pricing changes with the size and condition of the tree, access, equipment needs and whether removal, pruning or stump work is required.

      All rates ex GST and indicative only.

      What are typical tree service rates?

      Service type Indicative rate
      Tree pruning $60–$120/hr dry; $80–$150/hr wet
      Tree removal $300–$1,500/tree dry; $500–$2,000/tree wet
      Health assessment $100–$500/session
      Emergency tree work $150–$300/hr dry; $200–$400/hr wet
      Small stump grinding $120–$230/stump
      Large stump grinding $400–$600/stump

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Tree size and condition
      • Access and climbing requirements
      • Waste removal
      • Stump grinding
      • Permits
      • Emergency or after-hours work

      Licensing and approvals

      Many councils protect significant trees, so removal or heavy pruning may need a council permit. Check with your council or arborist before work starts.

      Related guides

      Tree pruning cost guide · Tree stump removal cost guide · Stump grinding cost guide · Tree lopping

      Common questions

      How much do tree services cost?

      Tree pruning costs about $60–$120/hr dry or $80–$150/hr wet. Removing a tree ranges from $300–$1,500 per tree dry to $500–$2,000 wet, and stump grinding adds $120–$230 for a small stump or $400–$600 for a large one.

      What affects tree service prices?

      Tree size, condition and access matter most, especially where a climber or crane is needed. Green waste removal, stump grinding, council permits and emergency call-outs are often quoted as extras.

      Demolition rates

      $80–$300/hr depending on structure size

      Demolition costs vary significantly with structure size, materials, access and the amount of waste that must be removed from site.

      All rates ex GST and indicative only.

      What are typical demolition rates?

      Service type Indicative rate
      Small building $80–$130/hr wet
      Medium structure $140–$200/hr wet
      Large structure $210–$300/hr wet
      Small detached house $15,000–$17,500/project
      Residential building $20,000–$30,000/project
      Commercial building $100–$130/m²

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Structure size
      • Construction materials
      • Asbestos and hazardous materials
      • Permits
      • Waste disposal
      • Site access

      Worked example

      Demolishing a small building at $80–$130/hr wet over two 8-hour days comes to about $1,280–$2,080 in machine time, before asbestos removal, waste disposal and permits.

      Licensing and approvals

      Demolition often needs council approval, and some states require a licensed or registered demolisher. Asbestos must be identified before work starts, and any asbestos above the licensing threshold must be removed by a licensed asbestos removalist.

      Related guides

      Asbestos removal cost guide · Excavator hire rates · Sydney · Melbourne · Brisbane · Perth · Adelaide · Gold Coast · Newcastle

      Common questions

      How much does demolition cost?

      Machine demolition runs about $80–$130/hr for a small building, rising to $210–$300/hr for large structures. Priced as whole projects, a small detached house is about $15,000–$17,500 and a larger residential building $20,000–$30,000, while commercial buildings are often quoted at $100–$130/m².

      What affects demolition prices?

      Structure size and materials set the base price. Asbestos and other hazardous materials, permits and tip fees can add substantially, so arrange a hazardous materials check before comparing quotes.

      Service locating (GPR and utility locating) rates

      $140–$300/hr with a locator

      Service locating rates depend on the locating technology, site complexity and the level of mapping or reporting required.

      All rates ex GST and indicative only.

      What are typical service locating rates?

      Service type Indicative rate
      Ground penetrating radar (GPR) $250–$500/day wet; $200–$450/day dry
      Electromagnetic locator $150–$350/day wet; $100–$300/day dry
      Acoustic locator $100–$280/day wet; $70–$250/day dry
      Metal detector $70–$150/day wet; $50–$130/day dry
      CCTV inspection camera $300–$600/day wet; $250–$550/day dry

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Equipment type
      • Site area
      • Number of services
      • Surface conditions
      • Reporting requirements
      • Travel and access

      Licensing and approvals

      Lodge a free Before You Dig Australia (BYDA) enquiry before any excavation. Locating then confirms those plans on site, so look for locators with CERTLOC certification.

      Related guides

      Safe excavation starts with BYDA · CERTLOC certification guide · Vacuum and hydro excavation rates · Ground penetrating radar · Underground locating services

      Common questions

      How much does service locating cost?

      A locator typically costs about $140–$200/hr, usually with a 2–4 hour minimum. By the day, GPR runs about $250–$500 wet and electromagnetic locating about $150–$350 wet, with CCTV pipe inspection at $300–$600.

      What affects service locating prices?

      The technology needed, the size of the area and the number of services to trace drive most of the cost. Formal mapping or reports, hard surfaces and travel can add time.

      Water bore drilling rates

      $50–$160/metre depending on bore type

      Water bore drilling is commonly priced per metre, with total cost influenced by depth, geology, casing, pump requirements and site access.

      All rates ex GST and indicative only.

      What are typical water bore drilling rates?

      Service type Indicative rate
      Residential bore drilling $50–$100/metre
      Agricultural bore drilling $60–$120/metre
      Industrial bore drilling $70–$140/metre
      Environmental bore drilling $80–$150/metre
      Monitoring bore drilling $90–$160/metre

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Bore depth
      • Ground conditions
      • Casing
      • Pump installation
      • Permits
      • Water testing

      Licensing and approvals

      Most states require a permit or licence before a bore is drilled, and the work must be done by a licensed water bore driller. Check with your state water authority first.

      Related guides

      Drilling and core drilling rates · Drilling contractors · Drill rig hire

      Common questions

      How much does water bore drilling cost?

      Residential bores typically cost about $50–$100 per metre to drill, agricultural bores $60–$120 and industrial bores $70–$140. Environmental and monitoring bores sit higher at $80–$160 per metre.

      What affects water bore drilling prices?

      Depth has the biggest effect because drilling is charged per metre. Hard or unstable ground, casing, pump installation, permits and water testing are usually added to the drilling cost.

      Piling and screw piles rates

      $350–$550/pile for standard screw pile installation

      Piling costs are driven by pile size, installation conditions and structural load requirements, with mobilisation and testing often quoted separately.

      All rates ex GST and indicative only.

      What are typical piling and screw pile rates?

      Service type Indicative rate
      Small screw pile $60–$90/metre
      Medium screw pile $90–$130/metre
      Large screw pile $130–$180/metre
      Standard installation $350–$550/pile
      Difficult terrain installation $550–$750/pile
      Heavy load-bearing installation $750+/pile

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Pile size and length
      • Soil conditions
      • Load requirements
      • Site access
      • Mobilisation
      • Testing and engineering

      Licensing and approvals

      Piles are normally specified by a structural engineer, often after a geotechnical investigation, and installed to the approved design.

      Related guides

      Screw piles · Piling contractors · Bored piers · Geotechnical drilling Sydney · Melbourne · Perth

      Common questions

      How much do piling and screw piles cost?

      Standard screw pile installation costs about $350–$550 per pile, rising to $550–$750 in difficult terrain and $750+ for heavy load-bearing piles. Priced by length, screw piles run from about $60–$90 per metre for small piles to $130–$180 per metre for large ones.

      What affects piling and screw pile prices?

      Pile size, length and the loads they must carry set the base price, and soft or rocky ground can slow installation. Mobilising the rig, engineering design and load testing are often quoted separately.

      Mobile welders rates

      $70–$160/hr for basic welding

      Mobile welding rates vary with the welding process, material, complexity and whether the job requires urgent or specialist on-site work.

      All rates ex GST and indicative only.

      What are typical mobile welder rates?

      Service type Indicative rate
      Basic welding $70–$160/hr
      Advanced repair work $180–$290/hr
      Fabrication projects From $230/hr
      On-site consultation About $100/hr
      Emergency welding $250–$350/hr

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Welding process
      • Material type
      • Job complexity
      • Travel and call-out
      • Consumables
      • After-hours work

      Licensing and approvals

      Structural steel welding is generally carried out to AS/NZS 1554, and hot work on an active site usually needs a hot work permit.

      Related guides

      Boilermaker rates · Welding and fabrication · Steel fabrication · Welding equipment hire

      Common questions

      How much does a mobile welder cost?

      Basic mobile welding typically costs $70–$160/hr. Advanced repairs run about $180–$290/hr, fabrication projects start from about $230/hr and emergency call-outs cost $250–$350/hr.

      What affects mobile welder prices?

      The welding process and material matter most, with aluminium, stainless steel and coded work usually costing more than standard mild steel. Travel, consumables and after-hours call-outs are often charged on top.

      Mobile truck mechanic pricing reflects labour, travel, diagnostics and the complexity of repairing heavy vehicles away from a workshop.

      All rates ex GST and indicative only.

      What are typical mobile truck mechanic rates?

      Service type Indicative rate
      Mobile truck mechanic $140–$220/hr
      Diesel mechanic $120–$200/hr
      Mobile diesel mechanic $130–$210/hr
      Diesel fitter $100–$180/hr
      Diesel servicing $110–$190/hr

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Repair complexity
      • Vehicle type
      • Diagnostics
      • Travel and call-out
      • Parts and fluids
      • Emergency response

      Related guides

      Diesel mechanic rates · Diesel mechanic cost guide · Mobile diesel mechanics · Diesel services

      Common questions

      How much does a mobile truck mechanic cost?

      A mobile truck mechanic typically charges $140–$220/hr. Diesel fitters ($100–$180/hr) and diesel servicing ($110–$190/hr) can be cheaper options for routine maintenance.

      What affects mobile truck mechanic prices?

      Complex repairs and diagnostics take longer, and heavy vehicles need specialist tools. Call-out distance, parts and fluids, and emergency roadside response all add to the bill.

      Land clearing rates

      $40–$150/m³ for residential clearing

      Land clearing rates depend on vegetation density, terrain, disposal requirements and the machinery needed to clear and prepare the site.

      All rates ex GST and indicative only.

      What are typical land clearing rates?

      Service type Indicative rate
      Residential land clearing $40–$150/m³
      Professional excavation services $70–$300/hr
      Small excavation combo $95–$105/hr
      Excavator and tip truck job $140–$170/hr
      Soil removal $30–$50/m³

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Vegetation density
      • Site area
      • Terrain
      • Equipment required
      • Green waste disposal
      • Access and mobilisation

      Licensing and approvals

      Clearing native vegetation usually needs approval from your council or state government, and the rules differ between states. Check before you book a contractor.

      Related guides

      Land clearing cost guide · Mulcher hire rates · Excavator hire rates · Tree clearing · Tree mulching

      Common questions

      How much does land clearing cost?

      Residential land clearing typically costs $40–$150/m³ of material removed. If you hire the gear by the hour, a small excavation combo runs about $95–$105/hr and an excavator with tip truck $140–$170/hr, with soil removal at $30–$50/m³.

      What affects land clearing prices?

      Dense vegetation, large trees and steep or rocky terrain take longer to clear. Green waste disposal and getting machinery to site are often significant extras, so ask whether mulching on site is an option.

      Concreting, cutting, grinding and repair rates

      $75–$150/m² for a concrete slab

      Concrete pricing varies by the type of work, finish, thickness and site conditions, so comparing like-for-like scopes is important.

      All rates ex GST and indicative only.

      What are typical concreting rates?

      Service type Indicative rate
      Plain concrete $60–$85/m² basic
      Concrete slabs $75–$150/m²
      Concrete repair and patch $50–$70/m² basic
      Concrete cutting $15–$40/m²
      Concrete grinding $10–$60/m²
      Concrete removal $30–$50/m²

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Concrete type and finish
      • Area and thickness
      • Reinforcement
      • Site preparation
      • Access and pumping
      • Cutting or repair complexity

      Worked example

      A 30 m² slab at $75–$150/m² comes to about $2,250–$4,500, before site preparation, pumping and GST.

      Licensing and approvals

      Residential slabs and footings are designed to AS 2870, and new slabs normally form part of an approved building design.

      Related guides

      How thick should a concrete slab be? · Coloured concrete costs · Concrete pump hire rates · Agitator truck hire rates · Concrete cutting Sydney · Concrete cutting Brisbane · Slab concreters

      Common questions

      How much does concrete work cost?

      A concrete slab typically costs $75–$150/m², with plain concrete from about $60–$85/m². Repairs run about $50–$70/m², cutting $15–$40/m², grinding $10–$60/m² and removal $30–$50/m².

      What affects concreting prices?

      Finish, thickness and reinforcement set the base price per square metre. Site preparation, pumping on sites without truck access and the complexity of cutting or repair work can all add to it.

      Hydraulic hose repair costs combine labour, call-out time and replacement parts, with urgent breakdown work often attracting additional charges.

      All rates ex GST and indicative only.

      What are typical hydraulic hose repair rates?

      Service type Indicative rate
      On-site call-out $150–$200
      On-site labour $110–$140/hr
      Hydraulic hose replacement $60–$250/hose
      Emergency after-hours service $180–$250/hr
      Diagnostic and testing $140–$200

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Hose size and pressure rating
      • Parts and fittings
      • Call-out distance
      • Emergency response
      • Diagnostics
      • Fluid disposal

      Related guides

      Diesel mechanic rates · Mobile hydraulic repairs · Hose Doctor

      Common questions

      How much do hydraulic hose repairs cost?

      Expect a call-out fee of about $150–$200 plus $110–$140/hr on-site labour. Replacement hoses cost about $60–$250 each, and after-hours emergency work runs $180–$250/hr.

      What affects hydraulic hose repair prices?

      Hose size, pressure rating and fittings drive the parts cost. Distance to site, emergency response and any diagnostics or fluid disposal add to the labour side.

      Excavation and earthworks rates

      $70–$300/hr for professional excavation

      Earthworks can be charged hourly, by volume or by project, depending on the machinery, material movement and scope involved.

      All rates ex GST and indicative only.

      What are typical excavation and earthworks rates?

      Service type Indicative rate
      Professional excavation $70–$300/hr
      Small excavation combo $95–$105/hr
      6 t excavator wet hire $105–$130/hr
      Excavator and tip truck $140–$170/hr
      Soil removal $30–$50/m³
      House foundation excavation $800–$15,000/task

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Machine size
      • Ground conditions
      • Haul distance
      • Spoil removal
      • Site access
      • Project scale

      Worked example

      A small excavation combo at $95–$105/hr for an 8-hour day comes to about $760–$840. Removing 20 m³ of spoil at $30–$50/m³ adds roughly $600–$1,000, before float and GST. House foundation excavation ranges widely ($800–$15,000) because it depends on footprint, depth and soil, so get a site-specific quote.

      Licensing and approvals

      Lodge a free Before You Dig Australia (BYDA) enquiry before digging. Trenches deeper than 1.5 m are high risk construction work, so they need a safe work method statement (SWMS) and protection such as shoring, benching or battering.

      Related guides

      Excavator hire rates · Mini excavator hire rates · How excavator hire rates are structured · SWMS for mobile plant hire · Earthworks Sydney · Gold Coast · Perth · Bulk earthworks · Soil disposal

      Common questions

      How much do excavation and earthworks cost?

      Most excavation is charged by the hour, from about $70–$300/hr depending on machine size. A small excavation combo runs about $95–$105/hr, a 6 t excavator on wet hire $105–$130/hr and an excavator with tip truck $140–$170/hr, while soil removal is usually priced at $30–$50/m³.

      What affects excavation and earthworks prices?

      Machine size and ground conditions set the hourly rate and how fast work progresses, especially in rock or heavy clay. Haul distance and spoil removal can add significantly, so confirm where spoil is going before comparing quotes.

      Surveying and engineering consultants rates

      $110–$300/hr depending on discipline

      Consulting rates vary by discipline, seniority and project complexity, with larger scopes often quoted as a project fee rather than purely hourly.

      All rates ex GST and indicative only.

      What are typical surveying and engineering consultant rates?

      Service type Indicative rate
      Civil engineering consultant $120–$190/hr
      Electrical engineering consultant $110–$180/hr
      Environmental engineering consultant $150–$210/hr
      Engineering surveyor $130–$180/hr
      Mechanical engineering consultant $110–$180/hr
      Structural engineering consultant $150–$300/hr

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Discipline and expertise
      • Project complexity
      • Site investigations
      • Travel
      • Software and equipment
      • Reports and approvals

      Licensing and approvals

      Boundary (cadastral) surveys must be done by a registered or licensed surveyor, and some states require engineers to be registered, such as RPEQ in Queensland.

      Related guides

      Surveyor cost guide · Types of surveying and their costs · Land surveyors · Cadastral surveyors · Structural engineering consultants

      Common questions

      How much do surveying and engineering consultants cost?

      Engineering surveyors typically charge $130–$180/hr and civil engineering consultants $120–$190/hr. Structural engineers sit at the top of the range at $150–$300/hr, with environmental consultants at $150–$210/hr.

      What affects surveying and engineering consultant prices?

      Discipline and seniority set the hourly rate, while project complexity, site investigations and the reports or approvals needed decide how many hours a job takes. Larger scopes are often quoted as a fixed project fee.

      Drilling contractors and core drilling rates

      $50–$150/hole for small concrete cores

      Drilling rates depend heavily on diameter, depth, material and drilling method, so the most useful pricing unit changes by project type.

      All rates ex GST and indicative only.

      What are typical drilling and core drilling rates?

      Service type Indicative rate
      Small concrete core ≤50 mm $50–$150/hole
      Medium core 50–150 mm $150–$350/hole
      Large core 150–300 mm+ From $500/hole
      Drilling equipment $100–$180/hr
      Diamond drilling $50–$150/metre
      RC drilling $30–$100/metre

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Hole diameter and depth
      • Drilling method
      • Ground or concrete conditions
      • Equipment
      • Site access
      • Travel and disposal

      Licensing and approvals

      Before core drilling through slabs, scan for post-tensioned cables, reinforcement and services (for example with GPR), and get engineer sign-off for cores through structural elements.

      Related guides

      Service locating rates · Water bore drilling rates · Geotechnical drilling Sydney · Melbourne · Perth · Core drilling · Geotechnical drilling

      Common questions

      How much does drilling and core drilling cost?

      Core drilling through concrete costs about $50–$150 per hole for cores up to 50 mm, $150–$350 for 50–150 mm and from $500 for large cores. Ground drilling is usually priced per metre, from $30–$100 for RC drilling to $50–$150 for diamond drilling.

      What affects drilling and core drilling prices?

      Hole diameter, depth and the drilling method set the base price. Reinforced concrete or hard rock, tight access and slurry or spoil disposal can add time and cost.

      Kerb and channel rates

      $50–$200/metre depending on project type

      Kerb and channel work is commonly priced per metre, with excavation, drainage, traffic management and project scale affecting the installed cost.

      All rates ex GST and indicative only.

      What are typical kerb and channel rates?

      Service type Indicative rate
      Residential kerb and channel $50–$75/metre
      Commercial kerb and channel $75–$100/metre
      Industrial kerb and channel $100–$150/metre
      Civil kerb and channel $150–$200/metre

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Project length
      • Kerb profile
      • Excavation
      • Reinforcement
      • Traffic control
      • Drainage and access

      Licensing and approvals

      Kerb and channel on public roads usually needs council approval and must meet council or road authority specifications.

      Related guides

      Traffic control rates · Concreting rates · Kerbing machine hire · Stormwater drainage

      Common questions

      How much does kerb and channel cost?

      Residential kerb and channel typically costs $50–$75 per metre, rising to $75–$100 for commercial work, $100–$150 for industrial and $150–$200 per metre for civil projects.

      What affects kerb and channel prices?

      Length and kerb profile set the base rate, with longer runs usually cheaper per metre. Excavation, reinforcement, drainage connections and traffic control on live roads add to the installed cost.

      Hydroseeding rates

      $400–$600 for up to 100 m²

      Hydroseeding pricing is strongly influenced by area, slope, seed mix and site preparation, with larger areas usually achieving a lower effective rate per square metre.

      All rates ex GST and indicative only.

      What are typical hydroseeding rates?

      Area Indicative rate
      Up to 100 m² $400–$600/project
      101–250 m² $700–$1,100/project
      251–500 m² $1,100–$1,800/project
      501–1,000 m² $1,800–$3,300/project
      1,001–1,500 m² $2,600–$4,500/project
      1,501–2,000 m² $3,300–$5,500/project

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Area
      • Slope
      • Seed mix
      • Mulch and soil amendments
      • Water supply
      • Site preparation

      Related guides

      Hydroseeding cost guide · Hydroseeding guide and tips · Perth · Brisbane · Melbourne · Hydromulching · Revegetation

      Common questions

      How much does hydroseeding cost?

      Hydroseeding up to 100 m² costs about $400–$600, rising to $1,800–$3,300 for 501–1,000 m² and $3,300–$5,500 for 1,501–2,000 m². Larger areas cost less per square metre.

      What affects hydroseeding prices?

      Area has the biggest effect, followed by slope and the seed mix. Mulch, soil amendments, water supply and any site preparation are often added on top.

      Septic and liquid waste rates

      $150–$200/hr for septic tank pumping

      Liquid waste pricing depends on the waste stream, volume, disposal requirements and travel, with hazardous material requiring more specialised handling.

      All rates ex GST and indicative only.

      What are typical septic and liquid waste rates?

      Service type Indicative rate
      Septic tank pumping $150–$200/hr
      Grease trap cleaning $100–$150/hr
      Industrial waste disposal $180–$250/hr
      Hazardous liquid waste removal $200–$300/hr
      Septic pump-out $250–$400/service

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Waste type
      • Volume
      • Disposal fees
      • Mobilisation
      • Site access
      • Emergency response

      Licensing and approvals

      New or replacement septic systems need council approval, and liquid waste must be carried by a licensed or permitted transporter to an approved disposal facility.

      Related guides

      Septic tank pump-out costs · How often to empty a septic tank · Fibreglass vs concrete septic tanks · Liquid waste removal · Grease trap cleaning

      Common questions

      How much does septic and liquid waste removal cost?

      A septic tank pump-out typically costs $250–$400 per service, or $150–$200/hr where it is charged hourly. Grease trap cleaning runs about $100–$150/hr, industrial waste $180–$250/hr and hazardous liquid waste $200–$300/hr.

      What affects septic and liquid waste prices?

      The type and volume of waste matter most, because disposal fees at licensed facilities are passed on. Travel, difficult access to the tank and emergency call-outs also add to the price.

      Bulk and heavy haulage rates

      $120–$240/hr wet hire

      Bulk and heavy haulage may be priced hourly, per tonne or per load depending on the cargo, distance and compliance requirements.

      All rates ex GST and indicative only.

      What are typical bulk and heavy haulage rates?

      Service type Indicative rate
      Small heavy haulage up to 50 t $120–$150/hr wet
      Medium heavy haulage 50–100 t $150–$190/hr wet
      Large heavy haulage 100 t+ $200–$240/hr wet
      Short mineral haulage $20–$30/tonne
      Long mineral haulage $30–$50/tonne
      Short liquid haulage $500–$1,000/load

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Load weight and dimensions
      • Distance
      • Permits
      • Escort vehicles
      • Route constraints
      • Loading and waiting time

      Licensing and approvals

      Oversize or overmass loads need permits and sometimes pilot or escort vehicles. Permits are issued through the NHVR in most states, and by Main Roads WA and the NT Government in those jurisdictions.

      Related guides

      Prime mover and low loader hire rates · Tipper truck hire rates · Low loader hire Brisbane · Newcastle · Perth · Heavy haulage · Float hire

      Common questions

      How much does bulk and heavy haulage cost?

      Heavy haulage typically costs $120–$150/hr for loads up to 50 t, $150–$190/hr for 50–100 t and $200–$240/hr for 100 t+. Bulk minerals are often priced per tonne ($20–$30 for short hauls, $30–$50 for long hauls), and liquid loads at $500–$1,000 per load for short trips.

      What affects bulk and heavy haulage prices?

      Load weight and dimensions decide the truck and trailer needed, and oversize loads add permits, escorts and route planning. Distance, loading time and waiting on site are the other big variables.

      Boilermakers rates

      $50–$150/hr depending on work type

      Boilermaker rates vary with the level of fabrication skill, certification, materials and whether the work is completed in a workshop or on site.

      All rates ex GST and indicative only.

      What are typical boilermaker rates?

      Service type Indicative rate
      Boiler fabrication $50–$100/hr
      Pressure vessel repair $80–$150/hr
      Structural welding $60–$120/hr
      Metal fabrication $70–$130/hr
      Industrial maintenance $70–$140/hr

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Trade specialisation
      • Materials
      • Coded welding requirements
      • Travel
      • Equipment
      • Urgency and overtime

      Licensing and approvals

      Structural welding is generally carried out to AS/NZS 1554, and pressure vessel work usually needs coded welders and independent inspection.

      Related guides

      Mobile welder rates · Metal fabrication · Steel fabrication · Aluminium fabrication

      Common questions

      How much does a boilermaker cost?

      Boilermakers typically charge $50–$100/hr for boiler fabrication, $60–$120/hr for structural welding and $70–$130/hr for metal fabrication. Pressure vessel repairs sit higher at $80–$150/hr.

      What affects boilermaker prices?

      Specialisation and coded welding requirements push rates up, as do higher-grade materials. Travel to site, equipment and urgent or overtime work add to the final bill.

      Concrete recycling rates

      $100–$140/tonne for collection, crushing and delivery

      Concrete recycling rates depend on whether the job covers collection, crushing, disposal or delivery of recycled material, as well as the volume and contamination level.

      All rates ex GST and indicative only.

      What are typical concrete recycling rates?

      Service type Indicative rate
      On-site concrete collection $60–$80/tonne
      Concrete crushing and recycling $30–$40/tonne
      Delivery of recycled concrete $20–$40/tonne
      Full service package $100–$140/tonne
      Crusher dust $20–$30/tonne
      Recycled road base $30–$40/tonne

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Concrete cleanliness
      • Volume
      • Transport
      • Crushing requirements
      • Contamination
      • Delivery distance

      Related guides

      Concrete recycling cost guide · Can concrete be recycled? · Crushed rock cost guide · Crushed concrete · Road base

      Common questions

      How much does concrete recycling cost?

      A full service covering collection, crushing and delivery typically costs $100–$140/tonne. Priced separately, collection runs about $60–$80/tonne and crushing $30–$40/tonne, while recycled road base costs $30–$40/tonne and crusher dust $20–$30/tonne.

      What affects concrete recycling prices?

      Clean concrete free of steel, timber and soil is cheaper to process, while contamination increases sorting and disposal costs. Volume, transport and delivery distance also affect the per-tonne rate.

      Line marking rates

      $6–$30/metre for standard to thermoplastic marking

      Line marking is usually priced by linear metre, but material choice, surface preparation and traffic management can materially change the final project cost.

      All rates ex GST and indicative only.

      What are typical line marking rates?

      Service type Indicative rate
      Basic line marking $6–$12/linear metre
      Thermoplastic line marking $15–$30/linear metre
      Reflective line marking $12–$22/linear metre
      Custom designs and logos $25–$45/linear metre or symbol
      Removal of existing markings $6–$12/linear metre

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Marking material
      • Surface preparation
      • Traffic management
      • Project size
      • Custom layouts
      • After-hours work

      Licensing and approvals

      Car park layouts generally follow AS 2890, and line marking on public roads must meet your state road authority’s standards.

      Related guides

      Traffic control rates · Road construction · Traffic management plans

      Common questions

      How much does line marking cost?

      Basic line marking typically costs $6–$12 per linear metre, reflective marking $12–$22 and thermoplastic $15–$30. Custom designs and logos run $25–$45 per metre or symbol, and removing old markings costs about $6–$12 per metre.

      What affects line marking prices?

      The marking material has the biggest effect, with thermoplastic costing more than paint but lasting longer. Surface preparation, traffic management on live roads and after-hours work can add to the job.

      Traffic control rates

      $50–$70/hr per traffic controller

      Traffic control quotes combine labour, equipment, vehicles and planning, with crew size and shift conditions driving much of the final cost.

      All rates ex GST and indicative only.

      What are typical traffic control rates?

      Service type Indicative rate
      Traffic controller $50–$70/hr per person
      Equipment hire $15–$35/item/day
      Mobilisation and setup $60–$170/day
      Traffic control vehicle $160–$350/day
      Planning and permits $250–$1,200 one-off
      Emergency response setup $600–$1,800/setup

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Crew size
      • Shift length
      • Equipment
      • Traffic management plan
      • Vehicles
      • Night or emergency work

      Licensing and approvals

      Traffic controllers must hold the ticket or accreditation required by your state road authority, and work on roads needs an approved traffic management plan or traffic guidance scheme.

      Related guides

      VMS board hire rates · Traffic management plans · VMS board hire · Road barrier hire

      Common questions

      How much does traffic control cost?

      Each traffic controller typically costs $50–$70/hr, with a traffic control vehicle at $160–$350/day and equipment such as signs and barriers at $15–$35 per item per day. Planning and permits are usually a one-off $250–$1,200.

      What affects traffic control prices?

      Crew size and shift length drive most of the cost. The traffic management plan, vehicles, equipment and night or emergency work add to it.

      Retaining walls and rock pitching rates

      $150–$500/m² depending on wall type

      Retaining wall and rock pitching costs vary with wall height, materials, engineering, excavation and drainage requirements.

      All rates ex GST and indicative only.

      What are typical retaining wall and rock pitching rates?

      Service type Indicative rate
      Block retaining wall $250–$450/m²
      Rock retaining wall $200–$350/m²
      Gabion retaining wall $300–$500/m²
      Boulder retaining wall $150–$300/m²
      Concrete sleeper wall $200–$400/m²
      Premium cut sandstone rock wall $280–$500/m²

      Source: Indicative Australian pricing published by iseekplant. Rates are estimates and can vary by location, project scope and contractor requirements.

      What can affect the price

      • Wall height
      • Material type
      • Excavation
      • Drainage
      • Engineering
      • Site access

      Licensing and approvals

      Walls above about 1 m high (the threshold varies by council) usually need engineering design and may need building approval. Walls near boundaries or supporting structures can also need approval.

      Related guides

      Retaining wall cost guide · Concrete retaining wall cost guide · Types of retaining walls · Block retaining walls · Rock retaining walls · Retaining wall builders

      Common questions

      How much do retaining walls and rock pitching cost?

      Retaining walls typically cost $150–$300/m² for boulder walls, $200–$350/m² for rock and $200–$400/m² for concrete sleepers. Block walls run about $250–$450/m², with gabion and premium cut sandstone walls up to $500/m².

      What affects retaining wall and rock pitching prices?

      Wall height matters most, because taller walls need engineering, deeper footings and more drainage. Material choice, excavation and site access make up most of the rest.

      Are your services earning these rates?

      List your business on iseekplant. Get job requests from local customers and set your own rates. Join 34,000 suppliers already listed.

      Construction service FAQs

      How much do construction services cost in Australia?

      Costs vary depending on the trade, location and project scope. Some services are charged hourly, while others are priced by the metre, square metre, tonne, load or complete job.

      Are construction services usually charged by the hour?

      Some are. Mobile mechanics, welders and other specialist trades commonly use hourly rates, while services such as drilling, concreting and line marking may use different pricing units.

      Does the service rate include equipment?

      It depends on the contractor. Some rates include the required plant or machinery, while others itemise equipment separately.

      Are materials included in construction service rates?

      Not always. Materials such as concrete, asphalt, steel and replacement parts may be charged separately.

      Do contractors charge for travel?

      They can. Travel, call-out, mobilisation and demobilisation charges may apply, particularly for remote or regional projects.

      Are minimum charges common?

      Yes. Some contractors apply minimum hire periods, minimum labour hours or call-out charges for smaller jobs.

      Are construction service rates ex GST?

      Yes. All rates in this guide are ex GST unless otherwise stated. Confirm GST and any travel, call-out or materials charges on your final quote.

      What affects construction service pricing?

      Labour, equipment, materials, travel, project size, site access, working conditions and location can all influence the final price.

      How we calculate these rates

      The rates in this guide are based on current Australian contractor pricing, supplier rate information and services available through the iseekplant marketplace.

      Because different trades use different pricing models, rates are compared using the unit that best reflects how each service is normally charged, such as per hour, per metre, per square metre, per tonne or per project.

      Hiring or listing, start here

      Compare quotes from local contractors, or put your services in front of customers. Both are free.